bing tracking image
  1. Trailer Breakaway Kit
  2. Bright Way
  3. Kit with Charger
  4. Battery Included
  5. Side Load
  6. 5 Ah
Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load

Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load

Item # 3802346
Retail:$57.82
Our Price: $48.90
You Save: 15%
Trailer Breakaway Kit
Shipping Weight: 4 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected. Great Prices for the best trailer breakaway kit from Bright Way. Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load part number 3802346 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (199)
  • Q & A (0)
  • Photos

Bright Way Trailer Breakaway Kit - 3802346

  • Kit with Charger
  • Battery Included
  • Side Load
  • 5 Ah
  • Bright Way
  • 1 Amp Charger
  • Single-axle
  • Tandem-axle
  • LED Tester

Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.


Features:

  • Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle
    • Brakes receive signal to activate when cable detaches from switch
  • Built-in charger automatically charges battery while connected to tow vehicle
  • Push-to-test button lets you check the battery's state of charge
    • LED lights indicate current battery status
      • Green = fully charged
      • Yellow = charging
      • Red = recharge needed
  • Side-loading case is easy to access from the side
  • Durable, plastic case protects the battery from the elements
    • Rubber O-ring seal keeps out moisture
  • 12-Volt, sealed lead-acid battery is rechargeable
  • Wire loom neatly contains and protects wires
  • Switch and battery box install on trailer frame - drilling required
    • Hardware not included
  • Convenient wiring diagram is printed on box
  • Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom


Specs:

  • Application: single-axle or tandem-axle trailers with electric braking systems
  • Breakaway cable length: 4'
  • Charger amperage: 1 amp
  • Battery:
    • Capacity: 5 amp-hours
    • Voltage: 12V
  • Battery box dimensions: 3-3/4" long x 6" wide x 5" tall
  • 1-Year limited warranty


Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.



2382 Bright Way Group (BWG) Trailer Break Away System with Switch, 12V 5Ah Battery, 1 Amp Charger, and Wire Loom - Side Load

Replaces Bright Way Group (BWG) 2346




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load - 3802346

Average Customer Rating:  4.7 out of 5 stars   (199 Customer Reviews)

Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.

by:

Product is a direct replacement for the brake away system currently installed on my trailer. This item was delayed in getting to eTrailer, but the staff were great in keeping me updated on the delivery date.

Jordan G.

12/30/2023

Still working well. Battery has kept a charge and system has worked as expected.



by:

Very nice unit to replace mine that the Trailers builders "forgot" to fold over the locking tabs on the channel that the unit slides into (after lunch friday oops) lol! and it hopped out when we ran through some most excellent pot-holes at 60 MPH on our fine interstate here in Virginia and it hopped out & hit the asphalt as it was still dangling by the wires. I found this at the first rest stop we hit and luckily i had a giant Tie rap to save the day and continue the journey. the wires were still in tact but the battery was long gone. Anyhow your replacement was exact, wires had a nice head-start splice on them and i am back in business. To sum it up i highly recommend y'all!!!



by:

Looks like a nice unit and definitely an improvement over my 1984 Teshonka unit that does not have a charger. Haven't installed it yet, still working on other brake parts but will add the review when in operation. Shipping was fast and price reasonable - thanks!

Linda

8/15/2023

So far Ive made 2 round trips with my rebuilt trailer and the Bright Way Breakaway Kit is doing great. Ive never had the trailer become separated from my E450, but Im sure the Kit would operate as it should. I installed it inside the triangular area of the trailer tongue, next to the wiring harness junction box and am very pleased by the quality. The battery gets charged as needed through the hot wire of the Fords harness. Very nice product and highly recommended! Just dont know how to add a photo....



by:

Works as designed. Delivered with the expected excellent results from etrailer.



by:

Easy hookup, minimal footprint and still working.

Jaren

12/18/2023

One Year later and had no issues with the product. The battery is still holding strong. Highly recommend!!



by:

Just installed the trailer brake emergency battery and break-away switch. Straightforward and simple. Brake electrical system working properly. Simple install, but understand the battery box has to be mounted to something upright with wire clearance underneath. I made a couple of simple L brackets from aluminum stock leaving about 1/2" of clearance.

Gregory

11/6/2020

Working properly with no problems.



by:

Great priced product for an older trailer. Easy installation everything I needed.

Mike

4/27/2021

It sat thru our Minnesota winter and the battery was just fine this spring. Hooked on and it performed like new.



by:

Nice upgrade from my stock 2014 breakaway kit that didn't have any of the status lights. Delivery was quick and everything worked good.



by:

Purchased as part of all parts required to upgrade a 1996 Jayco to electric brakes. Very pleased with quality of parts and results. Battery still fully charged after winter in storage!



by:

Easy to install has performed well.



by:

The products seem to take a long time to get to me



by:

Product works as described. etrailer has been excellent to work with.



by:

You folks are very polite and well informed. Great customer srvice!



by:

Worked great just as promised.



by:

These units do not do well in the sun, they should be covered. The push button cracked within 6 months and was completely gone shortly after. The unit works good, but in terms of longevity I think the electronics will succumb to the elements due to the button cracking and allowing rain inside the circuit board.



by:

I have found etrailer to be great to work with. Prompt shipment. The Bright Way Breakaway kit was very easy to install. I do like the wiring diagram on the front of the unit.



by:

Best option all in one



by:

Works great.



by:

Easy to install and quite complete.



by:

Was easy to install when I bought it and has worked flawlessly



by:

Works great, I've installed this on my larger gooseneck first and liked it so much I purchased another one for my smaller stock trailer. A lot better than standard break away batteries with aftermarket in line chargers. The installation is a breeze and finished results are very clean. Definitely will be installing on any other trailers I purchase in the future.



by:

Thankfully, to date I have not had to “test” my break-away brake system in an on-road situation. However, periodical stationary tests prove the system works as expected. One area of improvement would be in the fasteners used to secure the battery cover. They rusted within a month. 304 stainless steel fasteners would be a recommended low cost upgrade.



by:

Excellent customer service, reasonable pricing, timely shipping and delivery,, and quality parts for the past 10 years of doing business with etrailer.com. Keep up the good work.



by:

GREAT PEOPLE & GREAT SERVICE NEEDED TRAILER BATTERY, I WAS OUT OF TOWN NO BRAKES RUSHED MY ORDER TO ME.GOT RIGHT PART AND WAS TO ME IN 2 DAYS THANKS E TRAILER!



by:

Mounts easily and works like it should, self charging is convenient.

Dan B.

2/10/2022

Charger is still working and battery is in working order so you can test your brake system by pulling the pin. whats not to like!


25
199
Show More Reviews

See what our Experts say about this Bright Way Trailer Breakaway Kit

  • Parts Needed to Add Electric Brakes to a Trailer with Hydraulic Brakes
    To change from hydraulic to electric brakes you will need to swap out both the brakes themselves as well as the rotors for hub/drums. When it comes to the electrical side of things you'll need the wiring as well as a breakaway battery kit which will apply the trailer brakes in an emergency situation. If you're needing a kit rated for 3,500 lbs then I recommend the following parts: Self-Adjusting Brake Kit - # AKEBRK-35-SA Hub and Drum Assembly - # AKHD-545-35-EZ-K (5 on 4-1/2"bolt pattern) 10...
    view full answer...
  • Parts Needed To Install Electric Trailer Brakes On Nationcraft LLC 6x12 Enclosed Trailer Single Axle
    To upgrade your Nationcraft LLC trailer to electric brakes you will need the following parts. Electric Trailer Brake Kit # AKEBRK-35-SA Qty 1 Trailer Hub & Drum Assembly # 84546UC3-EZ Qty 2 Trailer Wiring Junction Box # 3375601101 Qty 1 Bargman 7-Way # WG54006-043 Qty 1 Ring Terminal # DW05702-1 Qty 8 Ring Terminal # 44-5310A Qty 6 Trailer Breakaway Kit # 3802346 Qty 1 You will need to determine how much 12 Gauge Wire # 12-1-1 you will need to run to both the brake assemblies from where...
    view full answer...
  • Best Parts For Electric Over Hydraulic Brakes on 2019 Grand Design Momentum 351M
    We can definitely put together a complete kit so you can add electric over hydraulic brakes to your 2019 Grand Design Momentum 351M tandem-axle trailer. You'll need to add four parts to your trailer - the brakes, actuator, brake lines, and breakaway kit; the best for that are the following: - (Two of these) DeeMaxx Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Maxx Coat/Stainless # DE88YR - Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi # HS381-8067 -...
    view full answer...
  • Correct Electric Brake Kit for Karavan Trailer with 3,500 lb Axle
    If your Karavan trailer has a 3,500 lb axle (which I believe you do) then yes, the 10" Dexter Electric Trailer Brake Kit # 23-26-27 will work great for your application! There are some other parts you need if you're upgrading your trailer to have electric brakes: - 10 Gauge Wiring # 10-1-1 (enough to reach from your trailer connector to 1 brake and then along the axle to the other brake) - Butt Connectors # DW05745-10 - Junction Box Kit # 3430001-JBK - 7-Way Molded Trailer Wire Connector...
    view full answer...
  • Parts Needed To Convert Hydraulic Disc Brakes To Electric Drum On a Four Wins Boat Trailer 5,200LB
    To replace your hydraulic brakes with electric brakes on your Four Winns boat trailer you will need the following parts. Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 qty 1 Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K qty 2 Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 qty 1 Trailer Wiring 7-Way Upgrade Kit w/ Junction Box # HS381-9000 qty 1 Fulton Fas-Lok Coupler # F346000301 qty 1 You will need Wire # 10-1-1 which is sold per foot to run to the...
    view full answer...
  • Replacement Breakaway Pin for Defender Breakaway Kit for Trailer
    For your Defender breakaway system the correct replacement pin and cable is the part # 3802350.
    view full answer...
  • Parts Needed To Install 5 On 5-1/2" Bolt Pattern Hubs On a 1987 M105A2 Trailer
    To be able to run the same 5 on 5-1/2" bolt pattern for your Jeep Wrangler on the M105A2 trailer you are going to have to cut off your current spindles to have 2 Spindles # TRU77FR installed. This is the common size spindle found on a 3,500lb axle which will then let you install 2 of the Hub/Drums # AKHD-555-35-EZ-K. With these you will want to install Electric Brakes # 23-468-469 since they are much better on an Overlanding trailer than surge type brakes. We do have a Junction Box # 3430001-JBK...
    view full answer...
  • Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle
    Thank you for the pictures Matt. I do see you have the backing plate for the brakes so you are most likely going to have #84 spindle since your axle has a 3,000lb capacity. You can verify this by removing one of your hubs and measuring the landings for the grease seal(1.719"), inner bearing(1.378") and outer bearing(1.063"). If this matches what you have you will want the following parts. Electric Drum Brakes # AKEBRK-35-SA Hub/Drum # AKHD-545-35-G-EZ-K Qty 2 Junction Box # 3430001-JBK...
    view full answer...
    Image 1 for Image 2 for
  • How to Remove Battery Bank From AC/DC Setup on 2007 Rockwood Lite Trailer
    Yes, you can ditch your battery bank and run everything off of shore power, but you will need to reconfigure a few things first - it's not as simple as disconnecting the battery and heading out. Disconnect the positive and negative connections from your battery and connect them to the DC panel to power your DC appliances. You'll also need to tie in any other DC powered things like jacks that may have been connected straight to the battery. Also, check on your breakaway battery. Some trailers...
    view full answer...
  • Parts Needed To Add Electric Drum Brakes To A Flatbed Utility Trailer
    Hi David, To add brakes you'll first need to check the axles to see if there is a brake mounting flange. If not then you'll have to replace the axles in order to get one with a flange so that you can mount brake assemblies. If you do have them then you can use the etrailer Electric Trailer Brakes # AKEBRK-35-SA. These brake assemblies are self-adjusting so once you complete the initial brake bedding process you won't have to adjust the brakes again. From there you'll need a hub/drum...
    view full answer...
  • Recommended Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery
    Thanks for the picture! I have a solution for you but you aren't going to be able replace just the box on your trailer. You will want to use the Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery item # 3802346. This kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom. It will secure your battery from the elements. I have linked a review video below that will walk you through the functions.
    view full answer...
    Image 1 for
  • Replacement Breakaway Kit Recommendation and How to Test Battery Charger
    I think the best way to test the battery charger on your breakaway kit is to apply 12V power to the wire that connects to the 12V power wire on your trailer and then test the other wire on the module to see if there is power coming through. If power is coming through then I would guess the charger is okay but no power means it's broken. The only real way to test the charger though would be to connect it to a battery that is depleted and see if it regenerates the battery. You'll need to...
    view full answer...
  • How To Properly Mount The Side Load Bright Way Breakaway Battery And Box
    The Bright Way Push-to-Test Trailer Breakaway Kit w/ 12V, 5-Amp-Hr Battery and 1-Amp Charger - Side Load Item # 3802346 needs to be mounted with the words/writing facing out as in the video. It is a side load so the terminals on the battery are at the top so they do not contact anything or become damaged.
    view full answer...
  • Parts Needed To Rewire and Add New Lights to a 7 X 16 Utility Trailer With Electric Trailer Brakes
    Here is a list of the parts you will need to rewire your 7' X 16' utility trailer. I have added the breakaway kit as it will be required by law as your trailer does have brakes. Hopkins 7-Way RV Style Connector # HM20087 etrailer Trailer Wiring Junction Box # 3430001-JBK Optronics Trailer Light Kit # TL16RK Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 Jacketed 2 Wire (Brake Wire) # 12-2-1 (sold [per foot)
    view full answer...
  • Can Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 be Used on Outside of Trailer Frame
    The Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 was designed to attach to the outside of a trailer frame like you asked about so it would work well for you. It is weather proof so that it would do fine as long as you didn't submerge it under water.
    view full answer...
  • Parts to Add Electric Brakes to 2015 Marine Trailer with Tandem 2K Axles
    Your combination of equipment is a bit confusing as the 10" wheels and 4,500 lb GVWR sounds like your axle capacity should be 2,000 lbs since you have a tandem axle setup. Even the idler hubs for 3,500 lb axle are normally used for 13" to 15" wheels. If you do in fact have 2K axles then here are the parts you need to add brakes to your axles: - Electric Trailer Brake Kit # AKEBRK-2 (1 per axle - these will fit with 10" wheels) - Hub and Drum Assembly # AKHD-545-2-EZ-2K (comes with...
    view full answer...
  • Does the Hydrastar Vented Marine Electric Over Hydraulic Actuator Come w/ a Break-Away Battery
    No, the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes # HS481-8067 does not come with a break-away battery. But, is compatible with any standard, 5-amp-hour-battery breakaway kit like the Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery # 3802346.
    view full answer...
  • Parts to Convert Surge Brakes to Electric Brakes on Boat Trailer With 3,500 lb Axles
    Thanks so much for that info, and we can get your boat trailer set up with electric brakes. Since you had an idler hub you will need a hub and drum for electric brakes, and with the bearing numbers you gave, that means you have 3,500 lb axles. That said, here is everything you'll need to make the conversion: - Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-K - Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand...
    view full answer...
  • Can Bright Way Trailer Breakaway Kit be Wired to Trailer Battery?
    The Bright Way Breakaway Kit # 3802346 cannot be charged through a 12V circuit because that would result in overcharging the battery which is why it has its own battery.
    view full answer...
  • Bolt On 3,500LB Trailer Axles For a Home Made Specialty Trailer With Electric Brakes
    All of our spindles like the #84 E-Z Lube Spindle # TRU74FR are going to be a weld on application. We do have the Timbren Axle-Less Trailer Suspension System # A35RS545E that allows you to bolt on the assemblies. This will come with the drum brake hub and electric trailer brakes. It uses a 5 on 4-1/2" bolt pattern which is most commonly used with the Karrier ST205/75R14 Radial Trailer Tire with 14" Galvanized Wheel # AM32156. We do have the 7-Way # H20046, Junction Box # 3430001-JBK, and...
    view full answer...
  • Wiring Needed For Adding Electric Trailer Brakes To a Utility Trailer
    It sounds like the Universal Installation Kit # ETBC7 might be what you are needing for your Jeep. This kit includes the wiring for the 7-way and Brake Controller # RED52VR along with a 20, 30 and 40 amp circuit breakers. Otherwise you would just have to get a 40Amp Circuit Breaker # PK54240PL to use with the Kit # 331-CBK30-EB. For the trailer you will need a Hopkins 7-Way RV Style Connector # H20046, Junction Box and Installation Kit # 3430001-JBK, Breakaway Kit # 3802346 and 12-Gauge...
    view full answer...
  • Parts Needed For Installing Electric Trailer Brakes Onto a Trition UT16 Tandem Axle Utility Trailer
    It would appear your Trition UT16 utility trailer will have axles using the standard #84 spindle dimensions. You will want to verify this is what you have by disassembling one of the hubs and measuring the spindle, see image below. The spindle will be 1.063" in diameter for the outer bearing, 1.378" in diameter for the inner bearing and 1.719 in diameter for the grease seal. You will also need to measure the mounting holes for the brake flanges. The mounting holes should be spread 2-13/16"...
    view full answer...
    Image 1 for
  • Wiring of Bright Way Push Test Trailer Breakaway Kit
    The 7th circuit that is omitted on the wiring diagram of the Brightway Breakaway Kit part # 3802346 is an aux circuit that is most commonly a reverse light circuit if it's used at all. The rest of the colors are standard function but if your colors are different you would need to wire by function instead. The actual taillight functions bypass the charge altogether so you would not need to worry about them with this box. The red wire is the 12 volt aux circuit which sometimes can be black,...
    view full answer...
  • Converting a 1995 Jayco Eagle 12 UDK To Use Electric Trailer Brakes
    First you will need the Electric Trailer Brake Kit # 23-47-48 to replace your hydraulic assemblies. We have the Dexter Trailer Hub and Drum Assembly # 8-173-16UC3 to get you a 4 on 4 mounting pattern. You will need to disassemble one of your hubs to verify it will fit the new hub as your axle is produced before they maintained records for their axles. This hub uses inner and outer Bearing # L44649 which is 1.063" inner diameter. For the wiring you will go from the Hopkins 7-Way RV Style...
    view full answer...


< Previous



Do you have a question about this Trailer Breakaway Kit?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Adam E
Installed by:
Adam E
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kristina F
Written by:
Kristina F
Employee Alex H
Updated by:
Alex H
Employee Eric H
Updated by:
Eric H
Employee Carrie F
Updated by:
Carrie F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.